-
A two component, heat cure epoxy system specifically developed for use on instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling endurance. Product meets UL 94-HB flammability requirements. CLC 15-150 A/B
-
Flexible polyurethane system for potting and casting in electrical applications. A two component, low viscosity, low durometer, polyurethane potting compound. The cured material meets the requirements of UL94-V0. CLP 7106 / CLI 4010
-
Economical, flexible, potting and casting polyurethane system. a solventless, low viscosity, flexible, two component polyurethane casting resin. CLP 7330 / CLI 4161
-
Semi-flexible epoxy adhesive and casting system. An unfilled, semi-flexible two component epoxy system. Its low mixed viscosity makes it suitable for potting and encapsulating electronic components. CLR 1020 / CLH 6021
-
Low viscosity, semi-flexible. An unfilled, semi-flexible two component epoxy system. Its low mixed viscosity makes it suitable for potting and encapsulating electronic components. CLR 1026 / CLH 6021
-
Low Exotherm, Low shrinkage epoxy. A two component, long pot life casting system with low exotherm, low shrinkage and excellent thermal shock resistance. CLR 1066 / CLH 6520
-
Large mass casting, 30-minute pot life. Masses larger than 6Lbs. A two component, filled, room temperature cure epoxy system.the product has a low exotherm and low shrinkage, making it suitable for castings larger than 3 kgs. CLR 1066 / CLH 6930
-
Flexible epoxy casting and potting system. An unfilled, semi-flexible epoxy casting system with long pot life. This product may be used in large mass casting. CLR 1180 / CLH 6520
-
Room temp cure, Excellent shock resistance. An exceptional epoxy casting system with excellent thermal and mechanical shock resistance. CLR 1180 / CLH 6560
-
A two component, unfilled, room temperature cure epoxy, for coating, casting, and adhesive applications. CLR 1180 / CLH 6770
-
Room temp cure, excellent shock resistance. An exceptional epoxy laminating system with excellent thermal and mechanical shock resistance. Product is suitable for a variety of applications. CLR 1180 / CLH 6930
-
Shock resistant, General purpose epoxy. A two component epoxy casting system. product has low shrinkage and excellent shock resistance. CLR 1183 / CLH 6560
-
General purpose variable substrate adhesive. A medium viscosity, unfilled casting system. It is suitable for large mass castings and exhibits good impact resistance. CLR 1190 / CLH 6025
-
General purpose variable substrate adhesive. A two component room temperature curing epoxy system. Product is suitable for potting, adhesive, and coating applications. Product meets the food and drug administration (FDA) regulations permitting use in food contact applications. CLR 1190 / CLH 6140
-
Low viscosity, RT cure. Impact resistant. Excellent thermal cycle. An exceptionally tough epoxy casting system with excellent low temperature thermal and mechanical shock resistance. CLR 1190 / CLH 6560
-
Clear low viscosity semi-flexible adhesive / sealant. A low viscosity, two component unfilled, room temperature cure epoxy system. CLR 1205 / CLH 6770
-
Low Density, Flame Retardant, 120°C Operating. A two component, low density, room temperature curing, flame retardant, epoxy potting/casting compound. CLR 1415 / CLH 6220
-
Excellent for potting thermostats and sensors. A two component, room temperature cure, potting and encapsulating epoxy system. Material contains non-abrasive fillers suitable for machine dispense. CLR 1583 / CLH 6229
-
Abrasion Resistant Epoxy. An abrasion resistant, two component epoxy surface coat. CLR 1710 / CLH 6710
-
UL 94-V0 system for potting and casting small electronic parts that require thermal shock and thermal cycling performance. A two component, low viscosity, room temperature cure epoxy system. Material has yellow card UL94-V0 rating, and contains non abrasive fillers suitable for meter mix dispense. CLR 1796 / CLH 6580